Medtec Science Phantom 320 12 Leads ECG EKG Simulator Holter Generator

Description

This is a very good brand (Medtec Science) 12 lead ECG simulator.
Made in Germany
. Top quality. Tested using a scope and all leads seem to function as should. Requires 2 AA batteries, which are not included. Back side has a list of the various output modes available from this device. New was 5.
Worldwide shipping with registered airmail for a flat rate of .
About the product:
The phantom 320 is a versatile simulator that allows you to test the correct functioning of your ECG and long-term ECG devices, monitors, recorders, arrhythmia computers and other devices.
In the medical electronics industry, it has long since become the epitome of ECG simulators: the phantom 320.
Nearly all test laboratories of TÜV, Dekra and other testing laboratories work with this handy device. The phantom 320 has also become an indispensable instrument in the quality assurance of medical technology products, for service and test field technicians as well as for device demonstrations in sales.
In addition to its user-friendliness, the phantom 320’s strengths include manufacturer independence and versatility. You can use the simulator to test the correct functioning of ECG and ECG long-term devices, as well as
monitors
recorders or
arrhythmia computers
Whether for normal or pathological ECGs: You receive a true-to-life, independent curve presentation for up to 32 ECG signals. With the phantom 320 you can simulate the following, among other things:
8 normal sinus rhythms
7 supraventricular and
9 ventricular arrhythmias and
3 pacemakers
Weight
0.8 kg
Dimensions
15 × 10 × 4 cm
12 Leads
I, II, III, avR, avL, avF, V1, V2, V3, V4, V5, V6
14 Connectors
4 mm banana plugs and snap buttons
Identification and colour code: DIN EN 60601-2-25
Digital Memory
1,6 Mbit
Resolution Amplitude
8 Bit
Sampling Frequency
256 Hz
Bandwidth Signal
0 – 120 Hz
Amplitude Signal (min-max)
Lead I + 1.35 – 1.49 mV
Lead II + 2.35 – 2.49 mV
Lead III + 0.95 – 1.06 mV
Lead V1 – 2.12 – 2.30 mV
Lead V2 – 0.55 – 0.61 mV
Lead V3 + 1.03 – 1.14 mV
Lead V4 + 2.11 – 2.21 mV
Lead V5 + 1.75 – 1.85 mV
Lead V6 + 1.40 – 1.51 mV
Time Base
Quarz 32768 Hz
Output Impedance
Electrode connections: 20 Ohm
1V outputs: 100 Ohm
Curve Types
8 sinus rhythms (normal QRS) 30,45,60,75,90,120,150,180 BPM
7 supraventricular arrhythmia
9 ventricular arrhythmia
3 pacemaker
2 ST segments (elevation, depression) Each with horizontal, ascending and descending ST wave
Bradycardia
Tachycardia
ECG with artefacts
ECG with interference 50/60 Hz
Signal Width
PQ, QRS, QT depending on RR interval (after Lepeschkin)
Battery
Default AA, 2x 1,5V LR6
Operating Time
Approx. 100 hours continuous operation
Environment Conditions
Working temperature: 0 – 40 °C
Storage temperature: -20 – 80 °C
Air humidity: 10% – 90% noncondensing
Barometric pressure 700 – 1500 hPa